cnc edge bender

[casmat]

hi everyone
does exist a cnc edge bender?

[knightsofnii]

people have built them with mixed results. the programming is apparently the most difficult part.

[casmat]

is possible that not exist a ''commercial'' machine?!?!
I saw on the web only custom bender
none company sell it? I can't believe that!

my concer are how to bend not round but elliptical edges

[twizzstyle]

You're not going to find a commercial off-the-shelf CNC edge bender. This is a DIY project, and there are lots of reasons its not easy. If you are a large ski company producing many sets of the same edge, the investment makes sense - even then you either have to build your own machine, or contract with someone to build you a custom. There is no market for a commercial CNC ski edge bender.

If you are a home-builder? It makes zero sense. Get yourself a set of tile nippers and modify them (you'll find pictures on the forum if you do some searching). It's a few dollars, and you get as good of results as you would with a CNC, it just takes a long time.

[casmat]

hi twizz and thank you for the explication!
I thought it existed ready to use,maybe for 1 or 2000 $
cheers