Seattle/Eastside area get together for local builders?

Yak away here, please! This category is for random discussions, comments, and anything but the topics shown above.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Bags
Posts: 5
Joined: Sun Jan 31, 2010 6:50 pm
Location: Seattle

Post by Bags »

I'll try to make it. Have to see if I can shake free of work that day, but if I can't I'll look forward to the second annual NW builders convention!
User avatar
Head Monkey
Posts: 310
Joined: Sun Jul 17, 2005 4:53 pm
Location: Carnation, WA
Contact:

Post by Head Monkey »

I dded up looking at my calendar. I can't make the 3rd. I could do Saturday the second, or the following weekend. Or I can just miss it this time and catch you all next time. Sorry for the confusion.
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
twizzstyle
Posts: 2204
Joined: Tue Mar 07, 2006 8:25 pm
Location: Kenmore, Wa USA

Post by twizzstyle »

I'm no good the 2nd, but I'm wide open the following weekend, 9th or 10th.
neatturns
Posts: 49
Joined: Thu Jul 28, 2011 1:15 pm
Location: USA

Post by neatturns »

I could also make it the 9th but the 10th is mothers day.
the.quass
Posts: 122
Joined: Mon Mar 04, 2013 12:02 am
Location: Melbourne, Australia

Post by the.quass »

You guys might know this. When I was in Fremont at the start of the month ( on holidays from Australia) I saw that Mervin MFG had an office there. It was after 5 on Saturday so i didn't explore and went to the brewery instead...
My question, is that offices or a factory? I was thinking about trying to get a look in the door but we left on the Monday.
Dtrain
Posts: 549
Joined: Wed May 18, 2011 12:03 pm
Location: Prince Rupert/Terrace B.C.

Post by Dtrain »

offices!
Bags
Posts: 5
Joined: Sun Jan 31, 2010 6:50 pm
Location: Seattle

Post by Bags »

I could make it the 9th
the.quass
Posts: 122
Joined: Mon Mar 04, 2013 12:02 am
Location: Melbourne, Australia

Post by the.quass »

Dtrain wrote:offices!
Thanks DTRAIN.
Seems the brewery was the right choice then.
RYM Experimentals
Posts: 85
Joined: Fri Dec 21, 2012 8:57 pm
Location: Fall City, Wa.
Contact:

Post by RYM Experimentals »

Would you guys rather go for the 9th or should we stick with the 3rd? Either day works for me. Can't so it on the 10th as it Mothers Day.
www.rymexp.com
On the edge of control is a good place to be!
twizzstyle
Posts: 2204
Joined: Tue Mar 07, 2006 8:25 pm
Location: Kenmore, Wa USA

Post by twizzstyle »

The 9th would actually work out way better for me now. I have a flying seminar thing down in Renton from 10-12 that day, then I can go fly for a little bit before we meet up on Mercer Island.
neatturns
Posts: 49
Joined: Thu Jul 28, 2011 1:15 pm
Location: USA

Post by neatturns »

I can make it on the 9th.
RYM Experimentals
Posts: 85
Joined: Fri Dec 21, 2012 8:57 pm
Location: Fall City, Wa.
Contact:

Post by RYM Experimentals »

OK, lets go with the 9th then. Same time 2pm at the Roanoke in Mercer Island.
www.rymexp.com
On the edge of control is a good place to be!
User avatar
Head Monkey
Posts: 310
Joined: Sun Jul 17, 2005 4:53 pm
Location: Carnation, WA
Contact:

Post by Head Monkey »

Cool. See you all on the 9th.
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
RYM Experimentals
Posts: 85
Joined: Fri Dec 21, 2012 8:57 pm
Location: Fall City, Wa.
Contact:

Post by RYM Experimentals »

See you all this afternoon. Ill be sporting my Whistler hat so you can find me easy. Its suppose to be hot out so make sure to check out back in the outdoor area.
www.rymexp.com
On the edge of control is a good place to be!
twizzstyle
Posts: 2204
Joined: Tue Mar 07, 2006 8:25 pm
Location: Kenmore, Wa USA

Post by twizzstyle »

See you there!
Post Reply