Snowboard inserts
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 45
- Joined: Mon Jun 04, 2012 1:24 pm
Snowboard inserts
Need some 6.5mm magnetic cap snowboard inserts. Can anyone help? My searches have turned up empty. Thanks!
Why not just use 5mm and insert them 1/2 mm deeper.
If you are worrried about indents in the base, then fill the gaps with .5mm veneer or something.
Guess if you are using the inserts as anchors to lock your base to your core in place, you will have 2 inserts 1/2 mm too deep, which shouldn't be a big problem.
If you are worrried about indents in the base, then fill the gaps with .5mm veneer or something.
Guess if you are using the inserts as anchors to lock your base to your core in place, you will have 2 inserts 1/2 mm too deep, which shouldn't be a big problem.
Camax used to sell all sorts of sizes but I don't know if they are even around anymore.
You can try what I'm about to do and buy non magnet cap inserts and swap some caps from the 7mm ones everybody has (I have about 200 of them). You only really need two magnet caps in each insert pack to be able to find the inserts, then use your insert template to find the rest.
You can try what I'm about to do and buy non magnet cap inserts and swap some caps from the 7mm ones everybody has (I have about 200 of them). You only really need two magnet caps in each insert pack to be able to find the inserts, then use your insert template to find the rest.