HB (Hansen Boards)

Document your personal work here. Show photos, movies, and share your secrets.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

HB (Hansen Boards)

Post by Akiwi »

We have been using HB for building longboards for the last year, so I guess we can keep it for skis and snowboards.

As the summer sports season has finished at last, I don't have to spend my weekends driving kids around to various smorts activities, so at last I have some time to get into the celler workshop (Manhole) and start on my new project to build some skis / snowboards befor the winter..
That is the plan anyway.

My first job is to build a Profilinf table.
But before I could do that I built a table with adjustable gate for my drill Press.
So building tools to help me build tools.
Thisw is something I have been needing for ages. I made an adjustable gate with a rail where a block can be tightenend to help with positioning when multiple holes are needed in the same place.
Also a replaceable puck in the middle where you can drill into.
Image
Image
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

That was my Thursday Friday evening project.

Now I have started on my profile table.
I will use the router bridge technique, as I have a router, and don*t have a Planer.

I have decided to build an adjustable vacuum router bridge for snowboards and skis.

My first job is to build mark out, and drill all the holes for the vacuum

My 22mm MDF board is 40 cm wide, 200 cm long.

I hsed my drill press for drilling holes in the long axis.
Image

Vacuum cleaner is set up to remove dust immediately.
Image

As I got further in, my gate turned out to be too thick So I went as far as possible using the Drill press.
Image

The middle 3 rows I had to drill with the cordless drill, SO I decided to leave the middle without holes.

I drilled 1380 holes. My friends think I am mad. I am starting to think so too.

Image

Lastly I flipped the board and cleaned up the holes ion the inside.
Image

Now on to make the vacuum box.
User avatar
chrismp
Posts: 1443
Joined: Fri Feb 13, 2009 9:00 am
Location: Vienna, Austria

Post by chrismp »

So glad I have a cnc to drill all those holes :D
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

chrismp wrote:So glad I have a cnc to drill all those holes :D
My Arm would agree with you.
My wallet (and wife) wouldn't.
A CNC would make a lot of things easier. But it is not in my short term plans.. or budget.
knightsofnii
Posts: 1148
Joined: Tue Jan 08, 2008 6:02 am
Location: NJ USA
Contact:

Post by knightsofnii »

Akiwi wrote:
chrismp wrote:So glad I have a cnc to drill all those holes :D
My Arm would agree with you.
My wallet (and wife) wouldn't.
A CNC would make a lot of things easier. But it is not in my short term plans.. or budget.

same here. I did this on the CNC.
However, I still had to go back with a drill and dress up each hole, my arms were super sore, it took a couple nights.
Doug
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

Ok, Table is nearly finished.
I tested it and it holds quite well. Maybe I need a little more powerfull vacuum
Image

Image
I am nobody. Nobody's perfect, so I must be perfect.
Hannes
Posts: 93
Joined: Wed Nov 09, 2011 2:20 am
Location: NRW, Germany

Post by Hannes »

Nice railsystem. If it works I might copy it.
MadRussian
Posts: 712
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Post by MadRussian »

hope this rail system will work for you. Unfortunately it didn't work for me. Wonder what kind router bridge you built.
Also I don't think MDF good choice for material to make vacuum table.
I tried holes 1" apart like you at first and didn't find table create enough suction.... had to triple amount of holes
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
User avatar
falls
Posts: 1458
Joined: Tue Oct 27, 2009 5:04 pm
Location: Wangaratta, Australia

Post by falls »

It might help to seal the MDF top and sides with paint or varnish to direct as much vacuum through the holes as possible. MDF is porous.
Also I think I would go to the extra trouble of drilling out the holes in the middle. After all that's where your material actually is and it's the holes under the core that actually hold it down.
Looks like a great effort so far.
Don't wait up, I'm off to kill Summer....
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

Good tips.
I sealed the inside of the vacuum box by mixing wood glue and water and painting that over the MDF. I will do the same on the top and sides.

I'm off to get some Plywood to do a test run.

I'll let you know.
I am nobody. Nobody's perfect, so I must be perfect.
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

Very happy with the results. It worked perfectly.

Here you can see detail of the bridge I built. I added angle iron to make it good and stiff yo I wouldn't get any sag.

I also taped up the exposed holes.
The board was held so tight I could lift the whole table with it. Great success.

Image

I decided to use a double layer of nuts instead of wingnuts on the top, as you can lock them together better. I figured the wingnuts could turn by themselves because of the vibrations. Using a spanner and wingnut on the bottom it was pretty easy to adjust the rails to 1mm or finer.

Image

The first core I made worked well. Maybe the flat bit on the tip which should be straight at 3mm for 20 cm wasn't perfect.. I can fix that with the sander, and tune it for next time..

Image

Image

I need to work something out to reduce the amount of dust.. My workshop looks like a bomb went off.
Last edited by Akiwi on Mon Oct 19, 2015 1:01 am, edited 1 time in total.
I am nobody. Nobody's perfect, so I must be perfect.
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

Damn!!!
I was doing my second core, and obviously something came loose on my router and it sank a bit, cutting the core right through. At about 30 cm from the tip. Grrrrr!!
I probably do need a new router. that one in the photo I have had for about 30 years. It is good, but not very powerfull, and difficult to adjust / lock etc.
I am nobody. Nobody's perfect, so I must be perfect.
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

The last couple of nights I have been experimenting in my celler making an edge bender. I think I have it working now. Tested on a short piece and can bend it how I want. Tight enough for skis.
Image
Image

It is mainly made of 20 x 4mm steel. Then at the top is bit of 20 x 20 to hold the arm centered.

I'll practice a bit with it and if I am satisfied with the results I'll do a video.

No comments on my welding. I bought a welder last year and taught myself.
I am nobody. Nobody's perfect, so I must be perfect.
User avatar
chrismp
Posts: 1443
Joined: Fri Feb 13, 2009 9:00 am
Location: Vienna, Austria

Post by chrismp »

Looks good! I guess you had inspiration from the bender Apex are using?

The modified tile nippers which are very common on this forum are a great addition to any bender for fine adjustments btw. Plus they cost next to nothing and are easy to make.
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

chrismp wrote:Looks good! I guess you had inspiration from the bender Apex are using?

The modified tile nippers which are very common on this forum are a great addition to any bender for fine adjustments btw. Plus they cost next to nothing and are easy to make.
Yes, I saw the Apex thing and flipped the direction, as their one the machine would be in the way for tight curves.

I was at Hagebaumarkt yesterday and wasn't sure what to buy. The tile snippers looked so small, so I was thinking the Nail pullers might be better.

Opinions?
What would be better.
A Kantenzange like this:
http://www.obi.de/decom/product/LUX_Kan ... ageSize=24

Or a Rabitzzange like this:
http://www.obi.de/decom/product/LUX_Rab ... ic/5255997
I am nobody. Nobody's perfect, so I must be perfect.
Post Reply