bit for profiling

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
sam
Posts: 29
Joined: Wed Oct 25, 2006 4:25 pm

bit for profiling

Post by sam »

Is this an adequet bit for core profiling in the one inch size.
http://www.amanatool.com/bits-fv/41410.html
Also shown here.
http://www.toolstoday.com/p-5211-detail ... ids=5135,0
Top
sam
Posts: 29
Joined: Wed Oct 25, 2006 4:25 pm

Post by sam »

Is it overkill.
Top
G-man
Posts: 600
Joined: Sat Mar 25, 2006 3:58 pm
Location: northern sierra nevada

Post by G-man »

Sam,

This is the type that I use:
www.carbide.com/catalog/SearchRBDetail. ... 0201.01.04

The K's use this type also, I believe:
www.skibuilders.com/howto/equip/profiler.shtml

I got one at Lowes or Home Depot (can't remember which). Works great and not too expensive. 1 1/2 inch diameter makes profiling go much faster.


G-man
Top
Post Reply

Return to “Equipment and Tools (e.g., ski press, core profiler, etc)”