Ski design mold

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
dvollebregt
Posts: 23
Joined: Fri Jul 26, 2013 2:27 am

Ski design mold

Post by dvollebregt »

Hi guys,

It's been a while, after successfully skiing my first pair i'm preparing for the next ones. On youtube I came by this ski design mold and was looking to build something like this. I looked all over the forum but I don't seem to find the right terms.

https://www.youtube.com/watch?v=ml5mJhhFJYI&t=1584s Around 3 minutes.

Also his way of molding seems fun!

Regards,

Duco[/img]
pmg
Posts: 479
Joined: Sat Dec 01, 2012 8:59 am
Location: Sonthofen

Post by pmg »

IMO this only makes sense if you build a lot of different shapes, as building this mold will take a lot of time.
dvollebregt
Posts: 23
Joined: Fri Jul 26, 2013 2:27 am

Post by dvollebregt »

Jup, true, i found search term sidecut jig. We are preparing building few pairs. We like to try a few different models, so yes might be cheaper to do this then cnc out different mdf models.
Post Reply