Bamboo in New England?

For discussions related to the type of materials to build skis/snowboards and where to get them.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
hegan
Posts: 130
Joined: Tue Jan 18, 2011 3:27 pm

Bamboo in New England?

Post by hegan »

I've been searching for a long time to find bamboo in New England and the only place I can find it is on the west Coast and shipping is outrageous. Does anyone know of any places in the north east to get bamboo?
User avatar
MontuckyMadman
Posts: 2395
Joined: Fri Jun 20, 2008 9:41 pm

Post by MontuckyMadman »

Well its grown and processed in asia so....
sammer wrote: I'm still a tang on top guy.
User avatar
Dr. Delam
Posts: 423
Joined: Thu Feb 01, 2007 10:07 am
Location: Truckee

Post by Dr. Delam »

Your best bet is to see if there are any local builders that do a decent production and go in on an order with them. I'd love to trade you for some New England hardwoods if I weren't in Cali.

I got a couple sheets last year and other than the fact that it makes cores super easy I'm not too stoked on it. Too soft flexing and also hard on my planer blades. To say that it's ecofriendly is also hogwash as it is shipped from half way around the world and there's a ton of glue in it.
User avatar
skimann20
Posts: 345
Joined: Wed Feb 27, 2008 8:28 pm
Location: Taxachusets

Post by skimann20 »

I have not seen anything out here. I had to get mine from the west. If you find it out here let me know.
sammer
Posts: 933
Joined: Wed Dec 19, 2007 10:37 pm
Location: Fernie B.C.
Contact:

Post by sammer »

I'm with the Dr on this.

Bamboo is probably the most hyped "green" product for the last few years.
Not only is it shipped half way around the world, but the process of making grass into lumber requires huge amounts of chemicals and energy.
I would bet if the bamboo was grown in North America you would not be allowed to make it into boards for environmental reasons. Or to make it clean would be cost prohibitive.
It is hard and fairly water resistant, so would probably make good side walls.
But for cores I found it's flex was too soft and it is really hard on tools.

If you want to promote green building find a saw mill close to you and buy your wood from them.
I've got a buddy with a small mill 5 km's from my house.
He cuts poplar, pine, and fir off of his property. This is "green" and supports my local economy!

sam
You don't even have a legit signature, nothing to reveal who you are and what you do...

Best of luck to you. (uneva)
User avatar
chrismp
Posts: 1443
Joined: Fri Feb 13, 2009 9:00 am
Location: Vienna, Austria

Post by chrismp »

sammer wrote:If you want to promote green building find a saw mill close to you and buy your wood from them.
I've got a buddy with a small mill 5 km's from my house.
He cuts poplar, pine, and fir off of his property. This is "green" and supports my local economy!
My thinking exactly! I have a sawmill 1.5h from where I live and they produce perfect boards of spruce that are used by pretty much all the big name piano manufacturers (they are really picky when it comes to wood). Plus, spruce has one of the best ratios of youngs modulus to weight and the best thing is that it's cheap. 8)
Post Reply