Ski Press and CNC Router for Sale
Posted: Sat Sep 14, 2019 6:51 am
Selling my ski press and CNC router, details below. The ski press itself is complete, but there are no molds and the cat track needs to be assembled. I started designing and building a custom CNC router for fabricating molds and then life got in the way before I fully finished. After not making progress in a couple years I'm looking to sell what I have.
Located in New Hampshire. PM with your email for pictures.
Ski Press, asking $1,200 OBO + freight/pickup
-constructed from 5" square steel beams. Professionally welded.
-Working area is: 84" x 15"
-Mounted on 6" casters for transport
-Comes with 2x custom silicone heat blankets (79" x 15", 120V, 1000W)
-partially finished cat track: 3/4" square tubes which have all been cut to length to run the length of the press. Comes with steel cable and hardware but holes need to be drilled and assembled
-comes with a 4ftx8ft 18ga steel sheet, uncut
-fire hose air bladder
-approx 80 feet of spare fire hose to use or resell
-spare section of 5" tubing, approx 8ft long
CNC Router, asking $1,000 OBO + freight/pickup:
-custom designed CNC router based on the Ox CNC and openbuilds parts.
-working area of approx 84" x 15" x 6"
-rack and pinion drive on the long axis, lead screw on the other 2
-brand new dewalt DWP611 router
-24V / 14.6A Power Supply
-CNC xPRO V3 Controller Stepper Driver
-Note: not fully assembled and you still need to supply 2 stepper motors to drive the long axis (approx $25ea). selling this at a discount from what all the parts cost considering that this isn't up and running. There are options for both opensource and proprietary software to run this, but I haven't taken that step yet.
Located in New Hampshire. PM with your email for pictures.
Ski Press, asking $1,200 OBO + freight/pickup
-constructed from 5" square steel beams. Professionally welded.
-Working area is: 84" x 15"
-Mounted on 6" casters for transport
-Comes with 2x custom silicone heat blankets (79" x 15", 120V, 1000W)
-partially finished cat track: 3/4" square tubes which have all been cut to length to run the length of the press. Comes with steel cable and hardware but holes need to be drilled and assembled
-comes with a 4ftx8ft 18ga steel sheet, uncut
-fire hose air bladder
-approx 80 feet of spare fire hose to use or resell
-spare section of 5" tubing, approx 8ft long
CNC Router, asking $1,000 OBO + freight/pickup:
-custom designed CNC router based on the Ox CNC and openbuilds parts.
-working area of approx 84" x 15" x 6"
-rack and pinion drive on the long axis, lead screw on the other 2
-brand new dewalt DWP611 router
-24V / 14.6A Power Supply
-CNC xPRO V3 Controller Stepper Driver
-Note: not fully assembled and you still need to supply 2 stepper motors to drive the long axis (approx $25ea). selling this at a discount from what all the parts cost considering that this isn't up and running. There are options for both opensource and proprietary software to run this, but I haven't taken that step yet.