Ski Press, Vacuum table, materials for sale
Posted: Wed Jan 08, 2020 10:30 am
I have a wooden ski press with a bunch of extras. I dont have time to devote to this hobby anymore.
Great entry to a very cool hobby.
I have:
4 bottom molds
2 top molds
6” firehose with compressor fitting
Wooden (cat track) ladder piece for even pressure across ski.
5 pieces of parachute fabric to encompass the press.
1 8’ vacuum suction table for profiling ski cores
Large roll of 19oz fiberglass wide enough for two skis.
A partial roll of biaxial carbon fiber
A partial roll of unidirectional carbon fiber.
Enough Entropy epoxy hardener/resin for a pair of skis.
Block of vertically laminated douglas fir for cores.
1 set of ready to press skis (core, base, edge, topsheet).
6 skinnier lengths of edge
4 thicker lengths of edge (2 rolled up)
Storage bin full of topsheet, base, tip fill material.
message me if you are interested in pictures.
Great entry to a very cool hobby.
I have:
4 bottom molds
2 top molds
6” firehose with compressor fitting
Wooden (cat track) ladder piece for even pressure across ski.
5 pieces of parachute fabric to encompass the press.
1 8’ vacuum suction table for profiling ski cores
Large roll of 19oz fiberglass wide enough for two skis.
A partial roll of biaxial carbon fiber
A partial roll of unidirectional carbon fiber.
Enough Entropy epoxy hardener/resin for a pair of skis.
Block of vertically laminated douglas fir for cores.
1 set of ready to press skis (core, base, edge, topsheet).
6 skinnier lengths of edge
4 thicker lengths of edge (2 rolled up)
Storage bin full of topsheet, base, tip fill material.
message me if you are interested in pictures.