Adhesive for base material
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Adhesive for base material
Hey guys, I’ve slowly been making my way through my first build and I’ve run into a problem. I can’t seem to figure out what adhesive to use for getting my edges onto the base material. As I understand it, UHMW polyethylene, or the base material, doesn’t have a lot of glues that will actually bond to it. I’m very new to this all and am trying to learn as much as I can. Anything and everything you might have will help. So what do you guys use? What would you recommend?
Re: Adhesive for base material
Have you tried searching the forum or the internet in general? This would have been easy to find.
You can find all the info you need on this here: http://www.happymonkeysnowboards.com/Mo ... o_the_base
You can find all the info you need on this here: http://www.happymonkeysnowboards.com/Mo ... o_the_base
Re: Adhesive for base material
Yeah, I think I figured it out now. I ended emailing on3p too and they were very helpful. Turns out I’ve been trying all of the wrong types of super glue, but the answer was actually super simple and I feel dumb now. Thanks though!
Re: Adhesive for base material
No worries, glad you were able to solve it!