epoxy cure time
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
epoxy cure time
I know this is a very basic question but I am not sure...
I am using a wood clamp press and pressing my board outside in a barn that is not insulated. I am using epoxy from snowboardmaterials.com which can be used without heat but is recommended to be used at 75º.
Do I have to wait for a warm day or can I layup and press in 50-60º weather and just leave it in the press longer? Is there a temp where the epoxy won't cure at all? Any links or threads on how epoxy works and more specifics on epoxy specs would be appreciated.
I am using a wood clamp press and pressing my board outside in a barn that is not insulated. I am using epoxy from snowboardmaterials.com which can be used without heat but is recommended to be used at 75º.
Do I have to wait for a warm day or can I layup and press in 50-60º weather and just leave it in the press longer? Is there a temp where the epoxy won't cure at all? Any links or threads on how epoxy works and more specifics on epoxy specs would be appreciated.
Re: epoxy cure time
This really depends on the specific epoxy you are using. There are so many formulas out there with different requirements and curing cycles. I would suggest that you try to contact either the seller or the manufacturer to find out if it cures at lower temps.
Re: epoxy cure time
A small fan heater in a tent over your mould(plastic sheet or something) will easily give you 15 degrees extra. Just make sure nothing that burns can get too close to your heater( so no sawdust or plastic directly against your heater)
Re: epoxy cure time
If you have or get a heat gun, you can make a quick box perhaps out of a sheet of 1" panel insulation, a heat gun on about 240-260F will get the inside temp to about 130-140F in about 20 minutes, another 40 minutes at that temp will cure that brand of resin quite well. You can poke some oven thermometers through the foam box.
Do wait for a warm day or at least have your core and materials and the resin warm. the resin can be really thick at those cooler temps and hard to spread easily.
Do wait for a warm day or at least have your core and materials and the resin warm. the resin can be really thick at those cooler temps and hard to spread easily.
Re: epoxy cure time
I have decided to just wait for a warm day. I really like that insulation box idea though. I think I might try this next winter.
Re: epoxy cure time
With the first pair, I used to cure it in a car parking on the sun. Later I made hotbox from plywood, glued insulation with silver foil inside and heat it with 4pc 100w light bulbs.
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Re: epoxy cure time
another option for the future buy heat blankets. They're not expensive nowadays from China.
My shop is not normally heated and when started that exactly reason (problem you have) I went with heat blankets and heated table.
Now if I need to I can press the skis when temperature in my shop barely above freezing
my point. is If you continue to work in the future In same cold environment blanket will make you less dependable on the weather
My shop is not normally heated and when started that exactly reason (problem you have) I went with heat blankets and heated table.
Now if I need to I can press the skis when temperature in my shop barely above freezing
my point. is If you continue to work in the future In same cold environment blanket will make you less dependable on the weather
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
Thomas A. Edison
Re: epoxy cure time
How cheap is cheap? I have looked and I haven't found any within my budget (which is tiny because I'm still in high school lol). Could you send links?MadRussian wrote: ↑Thu May 13, 2021 3:22 pm another option for the future buy heat blankets. They're not expensive nowadays from China.
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Re: epoxy cure time
at the time I needed heat blanket they was uploads of $500 ea this why many people, myself included, was building Their own. You can find long discussion thread on this subject. Conversation I remember blankets around $150 each. From China built to your specifications
good luck in your endeavor
good luck in your endeavor
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
Thomas A. Edison
Re: epoxy cure time
Check out Alirubber. I got mine from them.HH712 wrote: ↑Fri May 14, 2021 7:21 pmHow cheap is cheap? I have looked and I haven't found any within my budget (which is tiny because I'm still in high school lol). Could you send links?MadRussian wrote: ↑Thu May 13, 2021 3:22 pm another option for the future buy heat blankets. They're not expensive nowadays from China.
I also have a non insulated barn where I build mine. Sicomin 8500 and Greenpoxy are the easiest to work in the cold that I have tried.
Re: epoxy cure time
I still use my old electric blanket folded to fit over the skis on my vacuum press.
I cover it with a yoga mat for insulation, gets pretty darn hot.
I bought it at goodwill type store for a couple bucks.
Your mileage might vary
https://www.amazon.com/electric-blankets/b?node=3732191
sam
I cover it with a yoga mat for insulation, gets pretty darn hot.
I bought it at goodwill type store for a couple bucks.
Your mileage might vary
https://www.amazon.com/electric-blankets/b?node=3732191
sam
You don't even have a legit signature, nothing to reveal who you are and what you do...
Best of luck to you. (uneva)
Best of luck to you. (uneva)