Bunch of fiberglass and carbon
Posted: Tue May 10, 2022 1:35 pm
Vectorply Fiberglass:
ETLX-2200 (22oz triax):
- One full roll, ~5" wide
- One 5" wide roll maybe 1/3 left
- One 9-10" roll with enough for maybe a few pairs
ETLX-1900 (19oz triax):
- Two full rolls (pretty sure, one may have had a pair or two of skis pressed off it) 6" wide
Soller Composites Carbon:
- 6oz biax 36" wide ~30yrds
- 9oz uni: 12" wide, unused. 25.66lbs
- 4.1oz uni: 12" wide. Not sure how much left here. Not a ton, but enough for a handlful of pairs
FYI, after testing a number of carbon layups, we settled on a layer of the 6oz biax and a layer of 9oz uni above, and below core (symmetrical). This worked very nicely for skis in the 183-190 range, at least, with core profiles ~1.5-2mm | 10-12mm | 1.5-2.25mm.
- Box of misc bits. Some biax, a couple carbon sleeves I was trying to make ski poles with, etc.
Also have a brand new PID and thermocouple.
Ship at buyer's expense, or pick-up.
Currently in Nelson, BC, until May 13, 2022. Can arrange pick-up if pre-paid for a later date. Will be driving to Vancouver Saturday the 14th and could possibly drop off along the way. Otherwise, will ship via Canada Post w/ tracking from Vancouver.
Will consider all reasonable offers for part, or all; this stuff should get pressed, not sit in my garage.
ETLX-2200 (22oz triax):
- One full roll, ~5" wide
- One 5" wide roll maybe 1/3 left
- One 9-10" roll with enough for maybe a few pairs
ETLX-1900 (19oz triax):
- Two full rolls (pretty sure, one may have had a pair or two of skis pressed off it) 6" wide
Soller Composites Carbon:
- 6oz biax 36" wide ~30yrds
- 9oz uni: 12" wide, unused. 25.66lbs
- 4.1oz uni: 12" wide. Not sure how much left here. Not a ton, but enough for a handlful of pairs
FYI, after testing a number of carbon layups, we settled on a layer of the 6oz biax and a layer of 9oz uni above, and below core (symmetrical). This worked very nicely for skis in the 183-190 range, at least, with core profiles ~1.5-2mm | 10-12mm | 1.5-2.25mm.
- Box of misc bits. Some biax, a couple carbon sleeves I was trying to make ski poles with, etc.
Also have a brand new PID and thermocouple.
Ship at buyer's expense, or pick-up.
Currently in Nelson, BC, until May 13, 2022. Can arrange pick-up if pre-paid for a later date. Will be driving to Vancouver Saturday the 14th and could possibly drop off along the way. Otherwise, will ship via Canada Post w/ tracking from Vancouver.
Will consider all reasonable offers for part, or all; this stuff should get pressed, not sit in my garage.