How much tip and tail riser do you use?
I made mine at about 40mm for my allround, and for my rocker 55mm.
I do like the look of it, but when compairing to other skis, its like only the half
I havent tested them in powder but on the slopes that doesnt make e real differents ..
Tip and tail rise
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Re: Tip and tail rise
My tip rockers usually rise 55--65mm depending on which mold I'm using and type of ski. tail rise varies depending on the type of ski anywhere 15-40 mm, usually more in the 20-30mm range.
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
www.Whiteroomcustomskis.com
Re: Tip and tail rise
I also use less to tip height on my snowboards than I typically see in commercial boards.
40-50 mm on a typical snowboard shovel, 20-30mm on alpine snowboards (with tip length similar to skis).
15 years ago the 25mm rise got some weird looks, but nowadays most alpine snowboard manufacturers use something like that.
40-50 mm on a typical snowboard shovel, 20-30mm on alpine snowboards (with tip length similar to skis).
15 years ago the 25mm rise got some weird looks, but nowadays most alpine snowboard manufacturers use something like that.