Press mold
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 12
- Joined: Sun Feb 04, 2007 11:47 pm
- Location: Tasmania, AUSTRALIA
Press mold
Does anybody have any CAD drawings they are able to post/send of their press mold. i am having trouble creating it in CAD software.
Even dimensions of the tip tails sections would be helpfull.
Thanks..
Cheers Dylan....
JUST DO IT..
JUST DO IT..
Re: Press mold
CAD-drawings? for the measurements of the mold or why do you need them?
actually i can`t help with cad drawings at the moment because my pc broke down. but maybe i can help you with some infos about tip and tail.
so for the mold in tip and tail i`d recommend a radius between 150-200mm. on my mold i took 180mm. this gets you a nicely bent tip - with the lenght of 150mm it results in a 55-60mm high tip. perfect for powder tail can be constructed analog to this
actually i can`t help with cad drawings at the moment because my pc broke down. but maybe i can help you with some infos about tip and tail.
so for the mold in tip and tail i`d recommend a radius between 150-200mm. on my mold i took 180mm. this gets you a nicely bent tip - with the lenght of 150mm it results in a 55-60mm high tip. perfect for powder tail can be constructed analog to this
plywood freeride industries - go ply, ride wood!
-
- Posts: 12
- Joined: Sun Feb 04, 2007 11:47 pm
- Location: Tasmania, AUSTRALIA
Re: Press mold
yep that is why i need them, couldntfigure out meaurements.plywood wrote:CAD-drawings? for the measurements of the mold or why do you need them?
Thanks for the tip plywood.
Cheers Dylan....
JUST DO IT..
JUST DO IT..