Section8 Cheetahs-Dachshunds
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact:
Put bindings on the Cheetahs skis tonight, flat filed, sharpened edges, hotwax them. Cheetah skis are done. My daughter saw them this weekend before I put bindings on , quote " Those are the sickest skis I've ever seen!" I guess she likes them
Pressed the dachshund skis friday night. I didn't use the new aluminum I got for the new cassette. It was too long for these skis (152cm). So I used the hardboard again (ugh) but this time I put some aluminum flashing underneath the tip area. That helped eliminate the edge fall. If I used 2 sheets of flashing it probably would have worked even better but, I was unsure. The edge fall was very minor this time. Cleaned them up on sunday. They came out good. A couple wrinkles in the top sheet but not too bad. Good edge fit.
I'll post more pics when they are done.
Pressed the dachshund skis friday night. I didn't use the new aluminum I got for the new cassette. It was too long for these skis (152cm). So I used the hardboard again (ugh) but this time I put some aluminum flashing underneath the tip area. That helped eliminate the edge fall. If I used 2 sheets of flashing it probably would have worked even better but, I was unsure. The edge fall was very minor this time. Cleaned them up on sunday. They came out good. A couple wrinkles in the top sheet but not too bad. Good edge fit.
I'll post more pics when they are done.
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact:
They text me all the time. Drives me nuts. I can't text for sh!t... I have an old phone, always gave them the phone upgrades.OAC wrote:Very good!
No text? Now is the show time we all dream of!You never know these days? Do you?skidesmond wrote: My daughter saw them this weekend before I put bindings on , quote " Those are the sickest skis I've ever seen!" I guess she likes them
(I mean the young ones language)
MM- Thanks for the tip. My next pair of skis will be for me, a GS racing ski. Debating full wrap tip or not. Seems I had less edge fall, but a real pain to bend. I have plenty of leftover edge pieces to practice on....
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact:
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact:
So, here are a couple pics :
As you can see I basically clamp the end of my edges between 2 wooden sticks, then I "roll" the part I want to bend around a cardboard tube. Doing so I bend both the base end the edges and I had no issue with edges breaking loose off the bases.
It's not a perfect fit to the cassette or the tip/tail mold, usually I slightly overbend it and the press takes care of the final shape. Works pretty well for me and it's quite fast to do.
The acetone is just used to clean the cassette and my scrapers...
As you can see I basically clamp the end of my edges between 2 wooden sticks, then I "roll" the part I want to bend around a cardboard tube. Doing so I bend both the base end the edges and I had no issue with edges breaking loose off the bases.
It's not a perfect fit to the cassette or the tip/tail mold, usually I slightly overbend it and the press takes care of the final shape. Works pretty well for me and it's quite fast to do.
The acetone is just used to clean the cassette and my scrapers...
A bad day skiing is always better than a good one at work...
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact:
sweet, that is a nice tip. pun intended.
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
www.Whiteroomcustomskis.com