Divide Rides
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
My new splitboard.
163cm
Dims/29.3-25.3-29.3
Topsheet/ Maple veneer w/rosewood inlay
4 ounce unicarbon
3.7 ounce 45/45 biax carbon
Core/ 2.2-7.2-2.4 sitka spruce, yellow cedar, paulownia. Poly sidewall.
3.7 ounce 45/45 biax carbon
4 ounce unicarbon
Vds
crown natural base
Cambered board with reverse between the feet. Board still sits flat on cambered contact points though. Though those composites look very lightweight; even with the only slightly icreased core thickness, this board is very stiff. And Very light.
[/img]
[/img]
163cm
Dims/29.3-25.3-29.3
Topsheet/ Maple veneer w/rosewood inlay
4 ounce unicarbon
3.7 ounce 45/45 biax carbon
Core/ 2.2-7.2-2.4 sitka spruce, yellow cedar, paulownia. Poly sidewall.
3.7 ounce 45/45 biax carbon
4 ounce unicarbon
Vds
crown natural base
Cambered board with reverse between the feet. Board still sits flat on cambered contact points though. Though those composites look very lightweight; even with the only slightly icreased core thickness, this board is very stiff. And Very light.
[/img]
[/img]
- LifeisRiding
- Posts: 80
- Joined: Sat Sep 26, 2009 7:21 pm
- Location: British Columbia
Great stuff~!
Your Boards look amazing! Thanks for the inspiration. I haven't built a board for the past 2 seasons but will be pumping out a new new ideas I have kicking around this winter.
How is the Snow up there right now? I am living in Victoria BC at moment myself but will be heading to Smithers next week and plan on hitting up Hudson Mnt for a few days while I am in the area.
How is the Snow up there right now? I am living in Victoria BC at moment myself but will be heading to Smithers next week and plan on hitting up Hudson Mnt for a few days while I am in the area.
- FigmentOriginal
- Posts: 140
- Joined: Mon Oct 24, 2011 1:13 pm