Kinkos board outline accuracy
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Kinkos board outline accuracy
I went to my local kinkos to have my board and core outlines printed on their large printer (the ones that architects usually use), and they came out inaccurate. I think they were off by about a centimeter.
What kind of printer is going to be accurate? Will it need to be some kind of plotter?
Esscher
What kind of printer is going to be accurate? Will it need to be some kind of plotter?
Esscher
It may be more of a file or program issue than a printer issue. My friend at work often has to re-size drawings before printing them if they are imported from an other program. The snow-cad files I give him all need it done. If you need, he will print templates on paper for $5 a sheet plus shipping. The paper he uses is wide enough that you may be able to get two ski shapes side by side.
1. Not sure.esscher wrote:1. Would it be more accurate printing from a .dxf file?
2. How does he resize them, do you know?
2. I believe he just re-scales the shape in his program to the correct over-all or running length and everything adjusts in proportion to that. All I know for sure is things come out straight and correct.
-
- Posts: 3
- Joined: Mon Dec 03, 2007 5:13 am
Hey guys.
I printed Marks templates for him when he did his build.
I have a 36" wide plotter/printer. I currently run 24" paper.
If you do a drawing in SnoCAD, and send me (or Mark) the DXF file, I can print it. My printer actually prints to scale. If I am to print them for you guys, I would need the DXF file, and the sizes of the snowboard (to check them for accuracy)
Kinko's or Staples should be able to do it to scale, but a lot of times when you transfer to PDF, or other format, you lose scale. Kinko's *Might* be able to print directly from DXF, but the problem is that you are leaving some kid to decide your scale for you.
PDF's can be printed to scale, they just need to be created a certain way. Another thing I could do would be to take your SnowCAD DXF's and make them a PDF (with proper scale) and send it out, so that you guys could save it on your computer and print it at your local Kinko's whenever you want. (Provided they print on roll paper and can make you a long print)
If you have any other questions, please let me know!
-Eric
I printed Marks templates for him when he did his build.
I have a 36" wide plotter/printer. I currently run 24" paper.
If you do a drawing in SnoCAD, and send me (or Mark) the DXF file, I can print it. My printer actually prints to scale. If I am to print them for you guys, I would need the DXF file, and the sizes of the snowboard (to check them for accuracy)
Kinko's or Staples should be able to do it to scale, but a lot of times when you transfer to PDF, or other format, you lose scale. Kinko's *Might* be able to print directly from DXF, but the problem is that you are leaving some kid to decide your scale for you.
PDF's can be printed to scale, they just need to be created a certain way. Another thing I could do would be to take your SnowCAD DXF's and make them a PDF (with proper scale) and send it out, so that you guys could save it on your computer and print it at your local Kinko's whenever you want. (Provided they print on roll paper and can make you a long print)
If you have any other questions, please let me know!
-Eric
-
- Posts: 3
- Joined: Mon Dec 03, 2007 5:13 am
Sure
Sure, just send them to me in DXF format with the stats and I can do it.
Chubs,
On the template, If you draw to the finished size you ski will be wider. You would need to take into account the width of the edge or when cutting the base, re-locate the template to the side (equal to the width of the exopsed edge) and cut one side then move it over to the other side and cut again. hope I expained it correctly.
rockaukum
On the template, If you draw to the finished size you ski will be wider. You would need to take into account the width of the edge or when cutting the base, re-locate the template to the side (equal to the width of the exopsed edge) and cut one side then move it over to the other side and cut again. hope I expained it correctly.
rockaukum
-
- Posts: 3
- Joined: Mon Dec 03, 2007 5:13 am
-
- Posts: 1148
- Joined: Tue Jan 08, 2008 6:02 am
- Location: NJ USA
- Contact: